Tag: unifi

Ubiquiti UniFi SDN Controller Software Release Notes: 6.0.22-6.0.23

Official Release Notes

Improvements

  • 6.0.23
    • Added MAC Address Filtering for WLAN.
    • Limited maximum shown upload/download utilization to 100%.
  • 6.0.22
    • Remove option to enable client statistics, they are now enabled by default.
    • Made updates to the System Settings Design and added a new Scheduled Upgrade Modal.
    • Add sub page transitions.
    • No longer allow changing timezone, hostname, and controller name on UniFi OS.
    • Improved Plug-and-Play adoption for UniFi OS.
    • Added “disabled” option for PMF (Protected Management Frames) in Beta Settings.

Bugfixes

  • 6.0.23
    • Fixed Accordions in Beta Settings Networks from being unable to open.
    • Fixed WiFi AI excluded channels dropdown/list.
    • System Settings -> Updates now uses 24h format if it is set in system settings.
    • Now ensures DHCP Relay section can be found in search.
    • Updated AP Group form labels.
  • 6.0.22
    • Removed VLAN Only networks with 0 VLAN tag and assigned Default LAN Network to affected WiFi Networks (this fix may not help in all reported cases).
      • The official release notes say “yet” – but it is unclear to me whether this means that the fix will eventually work for all reported cases (e.g. if some other component needs to be updated on some networks) or if another fix needs to be implemented.
    • Fixed number of clients reported on dashboard.
    • Fixed hostname validation rule.
    • Fixed WAN IP uniqueness validation on save.
    • Fixed issues submitting site-to-site VPN Configuration in Beta Settings.
    • Moved “Enable Smart Queues” tooltip to label.
    • Added error message for RADIUS secret length.
    • Now show content filtering for UDM and UXG family devices only.
    • Now gets WLAN limit for each band separately in Beta Settings.
    • Made style and component fixes in property panel.

Know Issues

  • 6.0.23
    • VLANs beyond UAP wireless downlinks issue seen in 6.0.22 is still under investigation.
  • 6.0.22
    • VLANs beyond UAP wireless downlinks may not have connectivity – actively under investigation.

Ubiquiti UniFi SDN Controller Software Release Notes: 5.12.35-5.13.32

Official Release Notes

Features

  • 5.13.29
    • Added L3 switching features for USW-Pro series.
  • 5.12.66
    • Added USP-Plug support.
  • 5.12.35
    • Added analytics opt-in modal which is displayed post upgrade.
    • Added toggle for analytics.

Improvements

  • 5.13.29
    • Now supports MongoDB 3.6.
    • Auto-optimize now enables Wi-Fi AI.
    • Prioritize busy times in Wi-Fi AI logic.
    • Updated Hotspot 2.0 for WFA requirements.
    • Added VHT160 option for Japan.
    • Now show client icons on DPI and statistics pages.
    • Improved SSID validation.
    • Improved support for USP Plug.
    • Now allow adopting UBB only if both devices are connected.
    • Now allow changing VHT mode for 5GHz radio on UBB.
    • Adjusted speed test statistics to longer intervals.
    • Added LTS notifications.
    • Added Analytics & Improvements opt-in modal which is displayed post upgrade.
    • Added description of SNMPv3 security options.
    • Now allow sending test emails via Cloud Email service.
    • Timezone dropdown is now searchable.
    • Updated IANA timezone database.
    • Updated inter-VLAN routing Network form.
    • Removed OP mode from Port Profiles.
    • Added MAC column to insights/known clients.
    • Updated available IDS/IPS categories to lessen false positives and improve resource use.
    • Renamed UDM-Beacon to UAP-BeaconHD.
    • Improved Property Panel for USW Leaf.
    • Now handle LCM sync event notifications on UDM.
    • Now support U-LTE on UDM devices.
    • Now support WAN failover on UDM devices.
    • Added UDM boot sound checkbox.
    • Other improvements to performance.
    • Updated translations and added missing events.
  • 5.12.72
    • Added link to help center.
  • 5.12.66
    • Some duplicates with 5.13.29.
    • Allow disabling element adopt in Connectivity Monitor settings.
    • Display UBB Bridge as one element.
    • Improved wording in Connectivity Monitor settings.
    • Replaced n/a with dash -.
    • Updated New Settings.
    • Used the device model as the default element name instead of MAC.
  • 5.12.35
    • Improved performance and fixed stability of controller user interface.

Bug Fixes

  • 5.13.32
    • Fixed DPI statistics inaccuracy.
    • Fixed Port Forward Accounting Rules to not override User-Defined Rules.
    • Omitted provisioning DHCP relay config when there are no DHCP server IPs configured.
    • Provision PD correctly for UDM LANs pointing to WAN2.
    • Fixed adoption of Protect cameras over Element Adoption SSID.
    • No longer shows warning configuration has changed on admin invite.
  • 5.13.29
    • Fixed calculations for Radio Retry Rate and Dropped Percentage.
    • Fixed and improved Hotspot RADIUS accounting support.
    • Fixed unable to set LAN2/WAN2 port to WAN2 on USG3.
    • Fixed grayed out load balancing for USG.
    • Fixed multi-port port forwards missing ports.
    • Fixed provisioning configuration.
    • Fixed missing permissions for admins in mobile apps.
    • Fixed RADIUS Mac Authentication on UAP.
    • Fixed reordering firewall rules.
    • UDM Devices
      • Fixed Guest Portal pre-authorization rules.
      • Fixed incorrect version redirect during setup process.
      • Fixed displayed WAN IP under Networks
      • Fixed firewall rule provisioning
      • Fixed uplink-monitor crash
      • Fixed WAN failover when using a PPPoE WAN
      • Fixed namecheap DDNS support
      • Fixed Switch Port Profile selection on UDM-Pro property panel
    • Fixed issues with Element Adoption
    • Fixed device disconnected status if Element Adoption is enabled
    • Fixed handling uplink stat for USP-Plug.
    • Fixed missing UBB LED configuration.
    • Fixed missing UBB link icon.
    • Fixed static DNS for U-LTE failover.
    • Fixed U-LTE redirect URL to unifi.ui.com
    • Fixed rendering of U-LTE unreachable button.
    • Fixed unnecessary U-LTE device status unavailable notice.
    • Fixed validation to allow up to 6 ports for LACP on compatible USW.
    • Fixed firmware cache for USF5P, USPRPS, US8.
    • Fixed false Disconnected status due to early timeout during device upgrade.
    • Fixed restoring large backups.
    • Fixed restore to default issues on Windows.
    • Fixed upgrade firmware from controller.
    • Fixed import of Site.
    • Fixed busy state for buttons.
    • Fixed missing IPS widget on Dashboard.
    • Fixed Rx/Tx columns on the device page.
    • Fixed displaying ports in the Utilization column at the Device page.
    • Restored virtual device images on Map page.
    • Fixed client count in Insights Statistics page.
    • Fixed saving firewall rules in Settings.
    • Fixed Last 1 Hour Filter for Past Guest Authorization.
    • Fixed empty neighboring AP list.
    • Fixed broken analytics in Hotspot Manager.
    • Fixed redirect when choosing Enable Threat Management in Beta Settings.
    • Fixed missing images in Beta Settings.
    • Fixed updating status of network controller on network.ui.com.
    • Fixed Debug Terminal during Remote Access.
    • Fixed site switching during Remote Access.
    • Fixed Wi-Fi AI page crash during Remote Access.
    • Fixed enabling Remote Access if 2FA is enable for SSO.
    • Fixed missing Events for Auto Optimize feature.
    • Fixed Push Notifications for many admins with the same preferred language.
    • Fixed missing Backup and Restore actions for Cloud Controllers.
    • Fixed inconsistent vap error in controller logs.
    • Fixed broken WebSocket connection un UI.
    • Fixed downloading device info.
    • Removed non-functional Restart Device permissions and allow for Site/Super admins only.
    • Skipped analytics provisioning on old firmware to mitigate unnecessary downtime.
    • Now regenerate self-signed certificates for existing installations to meet Apple’s new rules.
  • 5.12.66
    • Some duplicates with 5.13.29.
    • Fixed bug causing custom columns to reset on browser refresh.
    • Fixed blinking header in Settings/Services.
    • Fixed broken UI validation for comma-separated port range.
    • Fixed display terminal accordion.
    • Fixed empty channel for UBB.
    • Fixed filter for last hour.
    • Fixed Guest Portal on separate VLAN.
    • Fixed icons on maps.
    • Fixed unnecessary LTE device status unavailable notice.
    • Fixed wired client experience graph is always zero.
    • Fixed uploading images over WebRTC.
    • Fixed saving changes in Network tab in device property panel.
    • Now allows up to 6 ports to be in an aggregation.
    • Now shows LTE notifications only when the device is adopted.
    • Ability to Adopt ULTE on Cloud Controllers.
    • Fixed cannot change user group for client.
    • Fixed incorrect device memory usage in side property panel.
    • Fixed link aggregation option not visible on UAP HD.
    • Fixed Map Virtual Devices multiplying on drag.
    • Now refreshes notification settings after save.
    • Fixed selecting None for Native Network shows empty box in switch port profile.
    • Fixed test SMTP email button not working.
  • 5.12.35
    • Fixed restore on UDM when default site doesn’t have a gateway present.

Ubiquiti UniFi Firmware Release Notes: 4.0.69.10871 – 4.3.20.11298

Official Release Notes

Features

  • US-XG-6POE

Improvements

  • nanoHD/IW-HD/FlexHD/BeaconHD
  • UAP
    • [4.3.20.11298]
      • Improved isolated AP logging.
    • [4.3.13.11.253]
      • Improved tracking of DHCP state.
      • Improved guest portal stability.
      • Reduced false positives when forcing high performance devices to 5 GHz.
      • Improved fast roaming stability.
      • Re-architected static and dynamic VLAN support.
      • Improved encrypted netconsole reliability.
    • [4.0.69.10871]
      • Tweaked performance.
      • Refactored High Performance Devices.
      • Implemented ICMP RTT tracking, improved stability of tracking.
      • TCP Latency Report now shows N/A if no traffic.
      • Switched guest control to use ipset.
      • Now uses Access Point MAC Address for Fast Transition packets.
      • Added old IPW2200 cards to 2 GHz whitelist.
  • UAP-G3
    • [4.3.13.11.253]
      • Enabled VHT160 for Japan.
      • Improved throughput of VLAN-tagged SSIDs.
      • Improved crash log reporting.
  • UAP-G2/G3
    • [4.3.13.11.253]
      • Improved wireless uplink connect time and reliability.
  • UAP-G2
    • [4.3.20.11298]
      • Improved wireless uplink stability on downlink.
      • If debug logging is enabled, increase authenticator log level.
  • UAP-MTK
    • [4.3.20.11298]
      • Improved upgrade reliability.
      • Now send roam events instead of disconnect events when clients roam.
    • [4.3.13.11.253]
      • Throughput has been improved.
      • Fast roaming capability has been improved.
      • Added Refactor High Performance Device feature.
      • Disabled frequent Transmit Beamforming (TXBF) updates to increase client compatibility.
      • Improved wireless uplink background scanning.
      • Fixed connectivity issue with “high performance devices” feature in sites with many devices.
  • HW
    • [4.3.13.11.253]
      • Now detects/reports unstable processes.
      • Improved high memory usage reporting and memory reporting generally.
      • Improved status LED patterns/tempo.
      • Now allows sending anonymous analytics to developers.
    • [4.0.69.10871]
      • Allowed disabling crash and critical event reporting; now disabled by default.
      • Improved accuracy of memory use calculations.
  • USW-Pro/USW-PoE/USP-RPS
    • [4.3.13.11.253]
      • Updated LCM (Lifeycle Management?) firmware to add new status messages and fix PoE power checking.
  • USW-Flex
    • [4.3.13.11.253]
  • USW-Pro
    • [4.3.13.11.253]
      • Improvements to LCM firmware.
      • Implemented overheat and RPS power warnings.
  • USW-Gen2
    • [4.3.13.11.253]
      • Updated bootloader, now enables LEDs before booting.
  • USW
    • [4.3.20.11298]
    • [4.3.13.11.253]
      • Improved crash reporting.
      • Decreased STP load under some circumstances.
      • Improved multicast delivery.
      • Now reports port error reasons to controller.
  • ULTE
    • [4.3.13.11.253]
      • Improved on-screen graphics, updated display.
      • Added larger data overage backoff.

Bug Fixes

  • HD/SHD/XG/BaseStationXG
    • [4.0.69.10871]
      • Fixed several rare crashes.
  • HD/SHD/XG/UWB-XG
  • nanoHD/IW-HD/FlexHD/BeaconHD
  • US/L2-PoE/16-XG/XG-6PoE/USW-Pro
  • USW
    • [4.3.20.11.298]
      • Fixed DHCP flooding between isolated ports.
      • Fixed DHCP packet inter-VLAN route loop by DHCP snooping.
    • [4.0.80.10875]
      • Reverted changes from 4.0.69 that introduced DHCP issues when LACP is used.
  • US-8/16/24/48/###W/L2-PoE/16-XG/XG-6PoE/USW-Pro
    • [4.3.13.11.253]
      • Fixed regression/bugs causing DHCP issues when using LACP.
  • US-8/16/24/48/L2-PoE/16-XG/XG-6PoE
  • HW
    • [4.3.13.11.253]
      • No longer reboots if firmware update fails.
      • Fixed device disconnected after failed firmware download.
      • Fixed system log encryption memory leak.
      • Fixed slow frequency of internet ping after initial check.
    • [4.0.80.10875]
      • Limited MAC addresses from being reported when analytics are enabled.
    • [4.0.69.10871]
      • Fixed provisioning of system.analytics.status.
      • Remove HMAC-MD5 support for shell access.
  • US8-450W/USC-8
    • [4.3.13.11.253]
      • Fixed management VLAN.
  • USW-8
    • [4.3.13.11.253]
      • Fixed static IP bug after changing management VLAN.
  • USW-POE
    • [4.3.20.11.298]
      • Fixed PoE initialization issue.
      • Fixed LCM upgrading.
    • [4.3.13.11.253]
      • Fixed PoE LED issue on 16 port model after soft reboot.
      • Fixed flow control command.
  • USW-48-POE
    • [4.3.13.11.253]
      • Fixed port mapping.
  • USW-G2
    • [4.3.13.11.253]
      • Resolved issue with loopback test.
  • USW-Flex
    • [4.3.13.11.253]
      • Fixed PoE off failure when powered by 802.3af/at.
      • Fixed 802.3af reporting issue.
  • UAP-BeaconHD
    • [4.3.13.11.253]
      • Now factory resets device if wireless uplink is disabled on site.
  • UAP-AC-IW
    • [4.3.13.11.253]
      • Fixed multicast packet leaking security issue.
  • IWHD
    • [4.3.14.11.253]
      • Fixed invalid port parameters, port or cfg = NULL error when switch ports disabled.
  • UAP-PRO
    • [4.3.14.11.253]
      • Fixed wireless uplink static VLAN.
  • UAP
    • [4.3.20.11.298]
      • Fixed intermittent multicast packet loss on static VLANs.
      • Fixed memory leak in netconsole when operating as wireless downlink.
      • Fixed Gen1 PS4 connectivity issue when high performance devices enabled.
    • [4.3.14.11.253]
      • Fixed wireless uplink static VLAN.
      • Fixed reported QoS Basic Service Set (QBSS) channel utilization for 5GHz radio.
      • Fixed reported RSSI and noise floor.
      • Fixed issue with 0% Channel Utilization in QBSS Report.
      • Fixed issue when modifying High Performance Device feature.
      • Fixed multicast TX in congested 2.4GHz environment.
      • Fixed issue that caused second/third radio to intermittently not come up properly on provision.
      • Fixed DNS parsing instability.
      • Fixed stability issue when handling Dynamic Frequency Selection (DFS) events.
      • Fixed udhcpc continuous instability bug.
      • Fixed authenticator instability and crash reporting.
      • Fixed roaming notification for APs.
      • Fixed guest portal instability.
      • Fixed intermittent RADIUS COA failure.
      • Improved Fast Roaming management bridge detection.
      • Fixed memory leak when using Auto-Optimize Network or High Performance Devices.
      • Now keeps IPv6 enabled on dynamically created DVLAN interface.
      • Fixed multicast issue with DVLAN SSIDs and untagged Users.
      • Fixed configuration bug when DVLAN is disabled on SSID.
      • Fixed stability issue with ICMP tracking.
      • Fixed stability issue with WLAN schedules.
      • Fixed management VLAN bridging when using wireless uplink
      • Fixed sticky DNS latency reporting.
      • Fixed TCP latency calculation.
      • Fast Transition packets are now routed to proper bridge.
      • WEP clients are now allowed to be on VLANs.
      • Fixed a crash that could occur during Guest Control provisioning.
      • Fixed bug with Connectivity Monitor that caused it to bring down WLANs when gateway is unreachable.
      • Fixed ICMP latency stability.
      • Fixed DVLAN if management VLAN is unspecified.
      • Fixed minimum RSSI fast-apply issue.
  • UAP-G1
    • [4.3.14.11.253]
      • Improved probe response transmission.
  • UAP-G2/G3
    • [4.3.20.11.298]
      • Fixed some issues with wireless uplink connectivity.
    • [4.3.14.11.253]
      • Fixed minor Fast Roaming issue related to QBSS.
      • Added Antigua and Barbuda as countries.
      • Fixed DVLAN connectivity between clients on the same interface (introduced in 4.1.0).
      • Fixed slow memory leak when using a Dynamic VLAN SSID.
      • Fixed Activity Down stats.
  • UAP-G3
    • [4.3.20.11.298]
      • Fixed intermittent inability to connect with Gen3 UAP as downlink.
    • [4.3.14.11.253]
      • Adjusted environmental thresholds.
      • Fixed an issue with rate control handling which could trigger an assert.
  • UAP-G3/MTK
    • [4.3.14.11.253]
      • Fixed fast-roaming issues.
  • UAP-MTK
    • [4.3.20.11.298]
      • Fixed inability for WiFi to operate when proxy ARP is enabled.
      • Fixed issue when country is set to Faroe islands.
  • USP-RPS
    • [4.3.14.11.253]
      • Fixed false alert for power delivery.
      • Added initial RPS information to LCM.
  • ULTE
    • [4.3.14.11.253]
      • Added MSS clamping.
      • Fixed security issue if U-LTE had public WAN IP.
      • Fixed intermittent LTE upgrade issue.
      • Fixed support for SIM PINs.
      • Fixed DHCP client issue when guest network was enabled.

Ubiquiti UniFi Firmware Release Notes: 4.0.42.10433-4.0.66.10832

4.0.66.10832

  • USW
    • Added support to configure/show 802.1X idle timeout for MAC-based mode.
    • Adjusted log level for DHCP snooping and to prevent flooding..
    • Fixed port based MAC filter whitelist bug.
  • nanoHD/IW-HD/FlexHD
    • Improved memory usage.
    • Made system optimizations.
    • Fixed available channel list when country code set to Philippines.
    • Fixed DVLAN support when using MacAuth.
    • Fixed minRSSI support.
    • Fixed RADIUS MAC Auth support.
    • Fixed support for High Performance Devices features.
    • Made a fix to prevent PS-POLL storm from the STA connection state out-of-sync issue.
    • Fixed unknown/inconsistent VAP warnings.
    • Fixed User Group support when using multiple SSIDs and/or wireless uplinks.
  • FlexHD
    • Enabled DFS support.
  • UAP
    • Added support for resolving controller for guest portal when FQDN is unavailable on DNS used by guests.
    • Changed EAP auth timing.
    • Dynamically generates guest portal certificates using Apple rules and FIPS-140-2 requirements.
    • Improved DNS latency reporting to mitigate false positives.
    • Moved traffic mark allocation handling from device to controller.
    • Tweaked Wi-Fi Experience scoring.
    • Updated to hostapd 2.8.
    • Fixed 802.11k Neighbor Report request function.
    • Fixed a race condition which may cause DNS failures for Guest Portal.
    • Fixed Fast Roaming support after hostapd 2.8 update.
    • Fixed RADIUS DAS/DAC/CoA support.
    • Fixed several memory leaks.
    • Several fixes and improvements for Fast Roaming support.
  • UAPG2/G3
    • Fixed HT Information IE.
  • USW-Flex
    • Improved power management to allow PD(s) to power up when there is available power.
    • Fixed panic when netconsole encryption enabled.
  • USW
    • Enabled libcurl verbose logging.
  • HW
    • Added encrypted syslog/netconsole support.
    • Added crash and critical event reporting.
    • Enabled LLDP support for all possible devices.
    • Improved inittab process management.
    • Fixed netconsole setup issue when multiple ARP addresses present.
  • AC-M-Pro
    • Fixed flipped port negotiation stats.
  • HD/SHD/XG/BaseStationXG
    • Fixed netconsole encryption support.
    • Made microcode update to resolve a rare memory corruption issues.
  • UAP-XG/BaseStationXG
    • Fixed range of issues with 10Gbps Ethernet PHY.
  • US/US-PoE/L2-PoE/16-XG/XG-6PoE
    • Fixed DHCP leak on isolated ports when DHCP snooping is enabled.
    • Fixed IGMP fast leave provisioning.
  • USW-XG-6POE
    • Fixed flood of DHCP request/reply packets to all VLAN members.
  • UIS
    • Added Port Security feature support.

4.0.54.10625

  • UAPG2/G3
    • Fixed bug causing false dropped packets to be reported on dashboard.
  • UAPG1/G3
    • Fixed reported ethernet negotiation.
  • UAPG2
    • Fixed segfault during wireless adoption.
  • UAPG1
    • Fixed wireless uplink loop issue.
    • Improved client STA connection stability when using wireless uplinks.
  • AC-Pro/EDU/M-Pro/AC-IW/IW-Pro
    • Fixed ethernet PHY behaviour.
    • Fixed reported ethernet negotiation.
  • HD/SHD/XG/BaseStationXG
    • Fixed an issue where wireless uplink may fail to reconnect.
    • Fixed segfault during wireless adoption.
  • UAP-XG/UWB-XG
    • Fixed an issue with the uplink monitor which may have caused it to erroneously take down all SSIDs.
  • UWB-XG
    • Removed bandsteering as it’s unsupported on this device.
  • nanoHD/IW-HD/FlexHD
    • Adjusted block ACK log level to avoid log spam.
    • Changed so downlink AP follows channel width of the uplink AP.
    • Fixed broadcast/multicast tx stuck issue which may cause high memory usage.
    • Fixed inter-DVLAN broadcast and multicast traffic leaking.
    • Fixed issues with RF environment scan.
    • Fixed VHT information element.
    • Fixed Vietnam channel list.
    • Improved device boot time.
    • Made other stability improvements.
  • IW-HD
    • Fixed DVLAN DHCP issue when Port VLAN is enabled.
    • Fixed VLAN behavior on device reboot.
    • Now properly authenticates wired 802.1X clients on reboot/provision.
  • UAP
    • Added DNS latency tracking.
    • Added new event to identify STA disconnects.
    • Added support for Faroe Islands.
    • Now allows 40MHz on 2.4GHz when country code set to Japan.
    • Fixed a bug when SSH key added via config.properties instead of controller UI.
    • Fixed bug which may cause reboot after provision.
    • Fixed Fast Roaming support.
    • Fixed guest portal failing to redirect on untagged subnet when devices has a static IP.
    • Fixed guest portal provisioning and added reporting for configuration issues.
    • Fixed issue with Ring Chime Pro and PS4 when using Auto-Optimize Network or High-Performance Devices.
    • Fixed random error which caused device to crash when running RF Environment scan.
    • Fixed uplink monitor behavior under heavy unicast load.
    • Fixed wireless adoption backwards compatibility.
    • Made general improvements to Auto-Optimize Networks/High-Performance devices.
    • Improved CPU usage.
    • Improved wireless link stability and wireless uplink stat change logic.
    • Increased 5GHz bias for wireless uplink on dual-band models.
  • nanoHD/IW-HD
    • Fixed a bug where device may not reply to probe request frames.
  • US/US-POE/XG/USW-6POE
    • Added live link status update capability.
    • Enabled IPv6 support for management.
  • US-24-250W/500W
    • Fixed erroneous PoE init failure message on fully functional devices.
  • USW
    • Aligned syslogd prefix format with other devices.
    • Made a potential fix for a bug with DHCP snooping which can cause issues with DHCP.
  • US-16-XG
    • Fixed 2.5 Gbps speed report issue.
  • USW-6POE
    • Added 2.5 Gbps speed support for SFP+ ports.
    • Fixed PoE auto-detect behavior of 802.3bt ports.
    • Improved 802.3bt port compatibility with dual-voltage devices.
    • Improved reboot robustness.
    • Improved SFP port autodetect robustness.
  • SEC
    • Security improvements.
  • HW
    • Improved L2 unadopted upgrade robustness.

4.0.42.10433

  • UAPG2/G3
    • Fixed corrupt UBNT IEs.Now handle broadcast DHCP replies properly while using dynamic VLANs.
  • UAPG1/G2
    • System optimizations.
  • UAPG2
    • Fixed 100FDX negotiation issue after wired uplink state change.Fixed downlink AP crash when using a DFS channel for wireless uplink.Fixed wireless uplink priority selection fail.
  • UAPG1
    • Fixed ethernet negotiation.Fixed issue causing no ethernet link when link partner uses manual negotiation.Fixed remaining issues with establishing an ethernet link.
  • AC-Pro/EDU/M-Pro
    • Fixed performance regression in 4.x when uplink is 100Mbps.
  • HD/SHD/XG/BaseStationXG
    • Fixed mDNS leak when Broadcast and Multicast Filter enabled.Fixed reset button behavior.Made stability and compatibility improvements when using ‘Auto-Optimize Network’ or ‘High Performance Devices’.Updated kernel.
  • HD/SHD/XG
    • Fixed bug causing lower than expected MCS and throughput when TX power >=25dBm.
  • BaseStationXG
    • Fixed GPS support.
  • nanoHD/IW-HD/UDM-B
    • Added association tracking support.Added support for ‘High Performance Devices’ (also part of ‘Auto-Optimize Network’).Added support to display which client STAs support Fast Roaming.Enabled client STA keepalive support.Fixed 802.11w (PMF) provisioning.Fixed a crash when running RF Environment scanning.Fixed a null pointer access issue.Fixed AndesSendCmdMsg warnings.Fixed downlink AP TX rate degradation issue.Fixed false anomalies/failures.Fixed some memory leaks.Fixed speed regression caused by unaligned access.Fixed TX retry and drop count.Fixed wireless uplink packet forwarding issue.Improved multi-client performance.Stability improvements.System optimizations.Tweaked WiFi Experience scoring.
  • UDM-B
    • Disable RF Environment scanning as it’s unsupported.
  • UAP-IW
    • Fixed behavior so ports are switched instead of isolated.
    • Fixed link flapping and switch VLAN behavior.
    • Fixed port/management VLAN provisioning.
    • Fixed reported inittab respawn errors.
  • UAP
    • Added DFS backup channel feature.
    • Added initial RFC-5176 support.
    • Added U-NII-2C support for Panama country code.
    • Fixed a bug which caused mcad to be removed unexpectedly after a provision.
    • Fixed a bug with guest portal redirection.
    • Fixed and improved User Groups support.
    • Fixed Apple Watch support when using ‘Auto-Optimize Network’ feature.
    • Fixed connectivity issue for 2.4GHz only devices when using ‘Auto-Optimize Networks’ or ‘High Performance Devices’.
    • Fixed false ‘Blocked by access control’ anomalies.
    • Fixed false DHCP timeout/failure anomalies.
    • Fixed incorrect/lower than expected 2.4GHz TX power limits.
    • Fixed issues when multiple guest networks on an AP.
    • Fixed RADIUS failover behavior.
    • Fixed RF Environment scanning bug which caused APs to require a power cycle after running a scan.
    • Improved client STA compatibility when using ‘High Performance Devices’ (also part of ‘Auto-Optimize Networks’).
    • Regulatory updates for Russia.
  • U-LTE
    • Disabled RF Environment scanning as it’s unsupported.
  • USW
    • Fixed timeout issue when provisioning 200+ VLANs.
  • UIS
    • Improved PD compatibility.
  • USW-Pro/XG-6POE
    • Added initial routing support.
    • Fixed a bug that may cause the in-row SFP port to disable when setting an ethernet port to disabled.
    • Further improved PD autodetection.
    • Improved handling when no uplink detected.
    • Improved PoE reliability.
  • USW-Pro
    • Added LCM brightness/sync support.
    • Changed throughput update interval on LCM to 1 second.
    • Fixed a rare bug in LCM initialization during boot.
    • Improved reliability of LCM sync feature.
    • Tweaked LCM touch event behavior.
  • USW-Flex
    • Fixed a bug which may prevent device from booting.
    • Improved device initialization reliability.
  • US8
    • Disabled IPv6 on VLAN interfaces.
  • USW
    • Added Wired User Experience support.
    • Fixed 10/100Mbps manual negotiation.
    • Fixed false PoE overload events.
    • Fixed SNMPv3 data leaking without auth.
    • Improved Fault Status text when checking PoE info via shell.
  • SEC
    • Fixed CVE-2019-8912.
  • HW
    • Fixed alerts generated when inittab restarts a process.
    • Fixed STUN URL resolution.
    • Fixed support for Custom Upgrades via FTP.
    • Miscellaneous bug fixes and improvements.

Ubiquiti UniFi SDN Controller Software Release Notes: 5.11.39 – 5.12.22

Official Release Notes

Notes

A significant number of substantive additions/changes have been made, read notes carefully.

There is some duplication of items in notes, I’ve eliminated where I was certain it was duplicated. Italics are where I am pretty sure it was duplicated.

New Features

  • 5.12.22
    • Added Cloud Email.
      • No longer requires SMTP server for many alerts.
    • Added netconsole logging for USG.
    • Added new settings.
      • Added release channel selection for controller and firmware updates.
      • Added Wi-Fi AI.
      • Added Schedule enhancements.
    • Added push notification support.
    • Added RADIUS DAS/DAC/CoA support.
  • 5.11.39
    • Added 802.1X multi-host option.
    • Added ARP cache timeout configuration.
      • Gateway Property Panel –> Advanced.
    • Added Device Fingerprint customization.
    • Added DHCP snooping toggle under Site Settings.
    • Added high DNS latency anomaly.
    • Added info about GeoIP and IPS to System Config page.
    • Added LED and LCM brightness and sync control settings for compatible UniFi Switch devices.
    • Added new setup wizard.
    • Added option to define power source for USW-Flex.
    • Added per-device LED LCM override settings for compatible UniFi Switches.
    • Added per-port STP toggle with port profile support.
    • Added site-to-site data to VPN widget.
    • Added split SSID function (combine name/SSID).
    • Add start and stop range for IPv6 PD.
    • Added Japanese language.

Enhancements

  • 5.12.22
    • Added encryption support for syslog and netconsole logging to controller.
    • Added error messages for invitations.
    • Added experience panel headers.
    • Added per-port STP toggle to device property panel and profiles.
    • Added property panel experience graphs.
    • Added site-to-site data to VPN module.
    • Added subnet for IPv6 networks in Networks Table.
    • Added Wired experience score to client property table.
    • Now allows auto-upgrade for USG, USW, etc.
    • Now allows multiple mirrored ports on a single switch.
    • Now closes column selector on first outside click.
    • Completed Hotspot 2.0R2 support for WFA certification.
    • Excluded disabled devices from reported network health on dashboard.
    • Now filters all WiFi Metrics by selected APs.
    • Improved Device Fingerprinting database.
    • Improved scan processing logic in Wi-Fi AI.
    • Improved scatter plot performance.
    • Improved token fetching/handling.
    • Improved wireless uplink detection in Wi-Fi AI.
    • In-Wall Networks/VLANs pre-population.
    • Limit auto speedtests to 2 per day.
    • Made encrypted cookies option for the built-in Guest Portal.
    • Reinstated green device icons for 1st Gen UAPs.
    • Removed the sub nav from the New Settings nav item.
    • Now shows AP/port based on wired/wireless filter.
    • Now shows only APs in poor Wi-Fi element list in Dashboard tool-tip.
    • Stopped bundling Java with macOS package.
    • Stored What’s New last version in BE.
    • Updated default HT/VHT modes for Wi-Fi AI, 20MHz for HT20 for 2.4 GHz and VHT80 for 5 GHz.
    • Updated OUI table.
    • Now uses radio level satisfaction.
    • Uses the same size for USW and USG port icons.
  • 5.11.50
    • Updated OUI table.
  • 5.11.47
    • Stopped bundling Java with macOS package.
  • 5.11.46
    • Excluded disabled devices from reported network health on dashboard.
    • Removed some beta/coming soon tags from features in UniFi Network controller.
  • 5.11.39
    • Added dark background for config changed notification.
    • Added description to DPI blocking rules associated with WLANs.
    • Added experience graphs to property panels.
    • Added experience panel headers.
    • Added IPS ToS link.
    • Added space for active users column.
    • Added speedtest provider name and server location to speedtest dialog.
    • Added status text to a busy device in the device grid.
    • Added subnet for IPv6 networks in Networks Table.
    • Added Switch Experience and merge with WiFi Experience.
    • Added syslog to remote logging option.
    • Added WiFi Experience graph to all APs.
    • Added ‘unifi’ FQDN CNAMES for every local network’s domain_name.
    • Added wrapping to forget device form.
    • Adjusted timezone in IPS threat details.
    • Allowed automatic upgrades to run with non-cached firmware.
      • Between 01:00-03:59 local time only.
    • Allowed browser to determine dark.
    • Allowed only “guest” and “corporate” networks in DPI restriction assignment.
    • Allowed shift click to select multiple devices and clients.
    • Allowed SSH username to contain uppercase characters or be an email address.
    • Now auto opens the property panel when a batch item is selected.
    • Blinking tooltip in Insights/Switch Stats.
    • Changed Map default to topology view.
    • Clarified the warnings for the clients historical data.
    • Cleaned up statistics preferred timezone.
    • Now display voucher notes on the Guests list.
    • No longer show upgrade button for devices with Managed by Other status.
    • Made DNS improvements for USG.
    • Filtered all WiFi Metrics widgets by selected APs.
    • Hid the sticky dashboard modules on small resolution screens.
    • Made improvements to hotspot payment package visuals.
    • Improved handling of no PoE ports in Port Usage widget.
    • Improved performance of plots on dashboard.
    • Improved site switcher.
    • Increased space between ARP cache timeout and options.
    • Made IPS Dashboard dark mode and other improvements.
    • Loosened validation for guest portal redirect URL.
    • Made encrypted cookie optional for the built-in Guest Portal.
    • Marked retry rate with low packet count as green on AP Statistics chart.
    • Now only enable High Performance Devices when SSID is enabled on 2.4 GHz and 5 GHz radios.
      • Also part of Auto-Optimize Network.
    • Parameterize top 10 devices returned by stats endpoint.
    • Other performance improvements.
    • Preserve time range in various places.
    • Removed beta tag from “Allow meshing to other access points” on property panel.
    • Removed default map and show upload floorplan button instead.
    • Removed release notes from UI.
    • Removed remote syslog IP requirement when logging to controller.
    • Separated multiple radios in WiFi satisfaction tooltip.
    • Set default at UPnP form.
    • Set no-dns in the DHCPv6-PD node where static DNS servers are defined.
    • Shifted time series graphs.
    • Now shows action buttons for writable role on guest list.
    • Now shows AP/port based on wired/wireless filter.
    • Shows a message when speed caps are not met.
    • Now shows only APs in poor Wi-Fi element list in Dashboard status tooltip.
    • Now shows remote port number for USW uplink on device.
    • Now shows subnet in subnet column instead of gateway IP.
    • Now shows user avatar if available.
    • Now shows Wi-Fi experience in the client property panel to read-only users.
    • Now shows Wi-Fi name on confirmation screen in wizard.
    • Now supports dark mode in topology.
    • Tweaked IPv6 CIDR validation.
    • Updated experience value dynamically on topology nodes.
    • Updated remove Cloud Access confirmation message.
    • Updated virtual devices list.
    • Used the same size for USW and USG port icons.
    • Made improvements to USG ARP caching.

Bug Fixes

  • 5.12.22
    • Added missing STP table head to port profile list.
    • Added wrapping to forget device form.
    • Fixed and improved Device Fingerprint feature.
    • Fixed authentication failure tracking.
    • Fixed batch fingerprint console error.
    • Fixed date range selector.
    • Fixed Debug Terminal over WebRTC.
    • Fixed DPI chart legend alignment.
    • Fixed enable Remote Access error translation scope.
    • Fixed external MongoDB startup issue.
    • Fixed payments tool-tip.
    • Fixed invalid switch satisfaction scores.
    • Fixed minimum RSSI settings not visible in device property panel.
    • Fixed NPE for Download Device Info.
    • Fixed NPE when removing Networks on site without a gateway adopted.
    • Fixed possible NPE when restoring backup from command line.
    • Fixed property panel WLANS on change UI glitch.
    • Fixed reordering firewall rules.
      • See these three threads: 1, 2, 3.
    • Fixed settings console error.
    • Fixed site switching over WebRTC.
    • Fixed sorting by IP in Past Connections list.
    • Fixed switch port disable function.
    • Fixed topology scaling issue.
    • Fixed USG port form button wrapping.
    • Fixed WebRTC logs fetching.
    • Fixed wireless devices list view filters.
    • Invalidated UI data.
    • Prevented reflow on AP Retry Rate scatterplot when tooltip is shown.
    • Reduced NanoHD log spam when wireless uplink is down.
    • Removed duplicate STP setting in port profile form.
    • Restored missing VHT160 channel width option.
  • 5.11.50
    • Fixed authentication failure tracking.
    • Fixed invalid switch satisfaction scores.
  • 5.11.47
    • Fixed bug during initial setup which could cause Remote Access to be unavailable for 15 minutes.
    • Fixed untranslated country name in Speed Test modal.
    • Updated certificates generated by controller to be compliant with new Apple rules.
  • 5.11.46
    • Fixed initial setup wizard for UniFi Cloud Controllers.
    • Temporarily removed High Performance Devices feature from Auto-Optimize.
  • 5.11.39
    • Added missing translation key for SSH password to setup wizard.
    • Made time range filter use presets correctly.
    • Prevented disappearing graphs on granularity change in Stats/Overview.
    • Prevented empty ESSID in a new wireless network.
    • Prevented reflow on AP Retry Rate scatterplot when tooltip is shown.
    • Prevented unnecessary network form divergence alert.
    • Refresh DPI data on DPI drill down back action.
    • Restored missing user count plot in AP Property Panel/stats.
    • Restored radio type satisfaction plot in Stats/Performance view.
    • Now shows correct number of clients at dashboard.
    • Fixed active wireless users filter group counters.
    • Fixed adopt and upgrade process for USG devices on old firmware.
    • Fixed and improved Device Fingerprint feature.
    • Fixed AP Statistics tooltip on dashboard to refresh correctly.
    • Fixed applying Site settings to mitigate unnecessary device provisioning.
    • Fixed Auto-VPN status in VPN dashboard widget.
    • Fixed broken DPI details for user.
    • Fixed broken change password modal.
    • Fixed case when confirm modal reacts to previously entered Enter key as confirmation.
    • Fixed checkboxes and radio buttons in Firefox.
    • Fixed color on empty Client Frequency Distribution module graph.
    • Fixed console error in Topology view when no client ESSID is available.
    • Fixed date range selector.
    • Fixed device vendor on client list.
    • Fixed displayed WiFi packet counts.
    • Fixed DPI chart legend alignment.
    • Fixed DNS domain name validation so it’s case-insensitive.
    • Fixed empty tooltips in Client Statistics graphs and when password strength is good or great.
    • Fixed error messages in console.
    • Fixed error when trying to run scan via Auto Channels on Map.
    • Fixed exception in client radio filter.
    • Fixed incorrect default log level for controller when in default state or system.properties is empty.
    • Fixed incorrect device properties client list counters.
    • Fixed incorrect font colors in new RADIUS profile modal.
    • Fixed incorrect label attributes in hotspot payments HTML.
    • Fixed incorrect number of clients on client list in device property panel.
    • Fixed incorrect value range in client WiFi TX attempts graph.
    • Fixed incorrectly rendered symbols in toasts.
    • Fixed IPv6 encapsulation sizing.
    • Fixed issue preventing the scatter graph from working correclty on first load.
    • Fixed issue that could prevent database migration from succeed when upgrading.
    • Fixed layout issue in property panel for devices without a temperature sensor.
    • Fixed LCM provision when settings changed.
    • Fixed missing device ID parameter.
    • Fixed missing disconnected device name in general satisfaction tooltip.
    • Fixed missing icons for floorplan virtual devices.
    • Fixed nPE for Download device info.
    • Fixed NPE when adding custom DHCP options to new network.
    • Fixed odd line breaks in general satisfaction tool-tip and some toast messages.
    • Fixed overlapping elements in Edit group restrictions layout.
    • Fixed pagination of backup list.
    • Fixed password show (eye icon) overlapping long passwords.
    • Fixed provisioning for multiple guest networks with portal in a WLAN group.
    • Fixed retry rate graph on the dashboard.
    • Fixed signal sorting at clients list, when RSSI is equal then sort by a signal.
    • Fixed Site Migration modal.
    • Fixed sorting Client list by device type.
    • Fixed sorting by IP in Past Connections list.
    • Fixed switch port customization bug caused by missiong migration in earlier releases.
    • Fixed timeout issue when provisioning 200+ VLANs.
    • Fixed traffic counting on WAN ports.
    • Fixed traffic stats header wrapping in Firefox.
    • Fixed various bugs with guest portal pre-authorization.
    • Fixed USG port form button wrapping.
    • Fixed USG port validation so that both WAN and LAN always exist.
    • Fixed WeChat Hotspot Authentication.
    • Fixed wireless uplink isolated state misjudgment.
    • Increased allowance for upgrade time on nanoHD/IW-HD to fix false disconnect events.
    • Restored fixed IP value in the Client History list.

Ubiquiti UniFi Security Gateway Release Notes: 4.4.36

Official Release Notes

Since 4.4.34

  • No longer clears IPs from DHCP WAN interface in PREINIT of a forced renewal

Since 4.4.29

  • Load Balancing
    • Fixed route metrics not being properly updated, primarily experienced upon fail back
    • Fixed problem that caused one or both WANs to be marked down and stuck in this state
    • Fixed crash in ubnt-util when WAN was down for extended period
  • IDS/IPS
    • Fixed utmdaemon high CPU usage (caused “heartbeat missed” for some)
    • Added missing signatures
    • Suricata version string corrected to reflext correct version
    • Patch for CVE-2018-18956 DoS vulnerability in Suricata
    • Reduced frequency of lookups to ips1.unifi-ai.com for cloud connectivity.
    • Adjusted config for USG3 and USG Pro to decrease CPU/memory usage.
  • Now if no interface is found with “description WAN”, assume that the default interface for that hardware platform (config_network_wan) is included in the inform. Prevents a INFORM_ERROR
  • Speed test updates so as not to get stuck on non-responsive server
  • USG-XG-8 Only: With UF-RJ45-1G SFPs, pass through the copper link state to the SFP+ port.

Since 4.4.28

  • Fixed crash in speed test.
  • Restore logging of specific error conditions from controller.
  • Fixed image/css path issue introduced in 4.4.28 local web UI.
  • Upgraded Suricata to 4.0.5.

Ubiquiti UniFi Firmware Release Notes: 3.9.27.8537-4.0.21.9965

Sorting out all the different software releases from Ubiquiti can leave one in a bit of a tizzy (or at least it did me at first). Essentially things break down like this:

  • Most UniFi Equipment (APs, switches) – gets the general firmware release
  • UniFi Cloud Controller – this is the control software, the other software is installed on the individual devices, this is the management UI you use
  • UniFi Security Gateways – get their own firmware
  • UniFi Cloud Keys – get their own firmware, which is oftentimes just an update to the cloud controller software

Official Release Notes

Since 4.0.15

  • UAPG2
    • Improved latency in high traffic installations
  • HD/SHD/XG/BaseStationXG
    • Improved stability
    • Optimized multicast traffic
  • nanoHD/IW-HD
    • Fixed DTIM provisioning issue
    • Fixed a bug in TX power provisioning
    • Fixed WiFi Experience feature
    • Fixed bandsteering disconnection issue
    • Fixed displayed RX rate issue
    • Fixed available channel list for China
    • Fixed fast-apply issue with changing channel width
    • Fixed data forwarding issue when client STA roams from wired AP to wireless uplinked AP
  • IW-HD
    • Fixed wired 802.1X Auto Mode
  • UAP
    • Tweaked Wi-Fi Experience scoring
    • Improved wireless uplink loop detection
    • Fixed bug that might cause MAC ACL and bandsteering to conflict
    • Fixed uplink detection function
    • Fixed ifindex reporting via SNMP
    • Fixed VLAN provisioning bug introduced in 4.0.18
    • Properly isolated dynamic VLANs
    • Security improvements for guest authentication
  • XG6POE
    • Improved PD auto detect
    • Fixed PoE issue which may occur on reboot
  • USW
    • Fixed multiple bugs causing WiFi clients to show as wired once disconnected from WiFi network
  • HW
    • Fixed CVE-2019-5747
    • Misc

Since 4.0.14

  • HD/SHD/XG/BaseStationXG
    • Fixed some IE corruption (related to wildcard and uplink SSIDs)
  • nanoHD/IW-HD
    • Tweaked performance
  • HW
    • Misc.

Since 4.0.10

  • HD/SHD/XG/BaseStationXG
    • Fixed handled of IEs so wildcard SSIDs don’t cause memory corruption.
    • Resolved an illegal memory access when bonding enabled
  • XG/BaseStationXG
    • Enabled multi-radio wireless uplink
  • HD/SHD
    • Enabled VHT160 support
  • nanoHD/IW-HD
    • Fixed downlink staying disconnected after channel change or reboot when uplink using DFS channels
    • Fixed ADDBA Request loop triggered by some client STAs
    • Fixed dynamic VLAN with Fast Roaming issue
  • UAPG2
    • Fixed physical reset function
  • UAP
    • Fixed channel 14 support
    • Fixed issue where all downlink APs are disassociated when one donwlink detects a network loop
  • USW
    • Added alert temperature to environment stats
  • HW
    • Fixed an adoption issue which could occur after known device is reset to factory defaults
    • Misc.

Since 3.9.54

  • UAPG3
    • Fixed BLE support.Fixed a node leak.Fixed a bug here AP may wrongly kick a client STA when “on other VAP” occurs.Fixed a bug in uplink that would cause downlink to hang after channel change.Fixed inter-VLAN communication issue.Fixed and improved wireless uplink support.Fixed bug causing RF scanning to return incorrect results.
  • UAPG3/G2
    • Enabled VHT40/80 support for Japan.Switched to LEDE framework.Implemented upgraded authenticator.Fixed Fast Roaming support.Fixed Cell Size Tuning Support
  • UAPG2
    • Fixed a bug where downlink was disconnected when uplink AP changes channels.
  • HD/SHD/XG/BaseStationXG
    • Fixed and improved Hotspot 2.0 support.
  • SHD/XG/BaseStationXG
    • Enabled Rogue AP scanning on security radio.
  • XG/BaseStationXG
    • Fixed reported 10Gbps PHY rate.
  • BaseStationXG
    • Enabled LED bar and OLED display support.
  • nanoHD/IW-HD
    • Added client ‘Framed-IP-Address’ to RADIUS accounting data.
    • Improved 802.11k scanning.
    • Improved Ethernet stability.
    • Improved Fast Roaming support.
    • Fixed a bug which caused bandsteering to fail to initialize.
    • Fixed instability caused by enabling WLAN scheduling.
    • Fixed throughout issue for clients with certain Intel wireless cards.
    • Fixed wireless adoption issue.
    • Fixed a memory leak.
    • Fixed multiple downlink support.
    • Fixed wrong passphrase issue that some client STAs encountered.
    • Fixed mDNS packets being dropped by IGMP snooping.
    • Fixed bandsteering support when WLAN scheduling enabled.
    • Fixed bug causing instability when netconsole was enabled.
    • Fixed bug which caused some SSID(s) not to broadcast.
    • Fixed a bug in bandsteering.
    • Fixed issue with wireless adoption when in factory default state.
    • Fixed wireless uplink VLAN broadcast/multicast packets format error.
    • Fixed SSDP dropped by IGMP snooping.
    • Fixed bug causing a drop in transmit performance.
    • Fixed RF scanning support.
    • Fixed support for 8 SSIDs per radio.
    • Fixed bug which may cause an AP to stop forwarding packets when configured to use wireless uplink.
    • Fixed bug when using VLANs in a wireless uplink topology.
    • Stability improvements.
  • IW-HD
    • Added wired RADISU MA auth & DVLAN support.
    • Added wired 802.1X fallback VLAN support.
    • Added support for controlling PoE passthrough.
    • Enabled cell size tuning support.
    • Fixed 802.1X automode.
    • Fixed bug in wired 802.1X support.
    • Fixed wireless uplink support while in factory default state.
  • EDU
    • Uses new package manager for EDU SIP.
  • UAP
    • Enabled fast-apply support for minRSSI.
    • Silenced unnecessary LLDP log spam.
    • Fixed false MAC filter rejection anomalies in the controller.
    • Improved wireless uplink loop detection to fix disconnect issues.
  • USW
    • Added more DHCP snooping statistics to CLI output.
    • Increased local syslog size.
    • Now forwards IGMP report packets only on ports with LLDP remote entry.
    • Fixed bug causing issues with DHCP in some environments.
  • USXG6POE
    • Improved PD compatibility.
  • HW
    • Fixed DHCP option 43 support.
    • Fixed false ‘Decrypt Error’ events and improved logging.
    • Security improvement.
    • Miscellaneous bug fixes and improvements.

Since 3.9.42

  • UAPG3
    • Fixed bandsteering when using channel 144.
    • Fixed IP endianness issue.
    • Fixed DPI blocking support.
  • UAPG3/G2
    • Added advanced guest isolation support.
    • Added simple DNS tracking for client STAs to syslog.
    • Fixed leak which caused provisioning/upgrade issues (“Timeout waiting for OL vap X to stop” in syslog).
    • Fixed 802.1X identity not working when Fast Roaming was enabled.
  • XG/BaseStationXG
    • Added multi interface uplink support.
  • BaseStationXG
    • Enabled OLED display support.
  • nanoHD/IW-HD
    • Added 802.11k and 802.11r support.
    • Added support for minimum PHY rate control.
    • Improved wireless uplink stability.
    • Updated 802.11k scan policy.
    • Enhanced bandsteering and set daemon to 802.11v BSS Transition Management (BTM) only mode.
    • Fixed client STA can’t connect after WLAN schedule executed.
    • Fixed bug which caused default SSIDs to broadcast in some cases.
    • Stability and performance improvements.
  • IW-HD
    • Added DFS support.
    • Added wired 802.1X support.
    • Fixed an issue with client STA roaming.
    • Fixed scheduling while atomic bug which caused the management daemon to crash.
  • UAP
    • Added loop detection to wireless uplink.
    • Fixed a bug in RADIUS MAC Auth provisioning.
    • Fixed throughput drop.
    • Fixed bug with rate limiting support.
    • Fixed bug which allowed fast roaming to be enabled on SSIDs that are either open or using WEP.
    • Reduced uplink-monitor log spam.
  • USW
    • Fixed false RX Fault errors showing on some UF-RJ45-1G modules.
    • Fixed SNMPv3 fast-apply fail due to special characters in password.
    • Fixed switch LAG link failed bug.
    • Fixed a memory leak.
    • Fixed false alerts when fan running at low duty.
    • Fixed SSDP forwarding issue.
    • Fixed false overheating alerts.
    • Fixed LAG port LED off issue.
  • HW
    • Improved firmware update error code reporting.
    • Fixed device inform issue with DNS resolving to wildcard IPs.
    • Miscellaneous bug fixes and improvements.

Since 3.9.27

  • USW
    • Fixed RADIUS server provisioning.
    • Added Port Security and MAC ACL support.
    • Added 802.1X guest VLAN support.
    • Restarts DHCP client after a port is up.
    • Fixed LAN client stats when using LACP/LAG.
    • Fixed issue with default VLAN not working when using MAB.
    • Fixed ability to toggle flow control.
    • Disabled SNMP by default.
    • Reduced max VLANs to 255 (default), which lowers memory use by ~10%.
  • HW
    • Added URL support for DHCP option 43.
    • Several fast-apply provisioning improvements.
    • Unified several modules across various UniFi platforms (UAP, USW, USG).
    • Various bug fixes and improvements.

Since 3.9.24

  • UAPG3
    • Fixed crash when 802.11r enabled.
    • Reverted patch which disabled secondary ethernet when using wireless uplinks.
  • UAPG3/G2
    • Improved channel utilization reporting accuracy.
  • UAPG2
    • Improved performance.
  • HD/SDH/XG
    • Fixed issue with reported uplink interface after RF scan when bonding is enabled.
    • Fixed 802.1X VLAN reporting when RADIUS VLAN enabled.
    • Increased ntp client update frequency.
    • Improved client STA performance for SSIDs with DVLAN enabled.
    • Removed unnecessary logging.
  • SHD/XG
    • Fixed performance issue.
  • XG
    • Reenabled auto-negotiation on the 10GbE PHY.
  • nanoHD
    • Reenabled auto-negotiation on the 10GbE PHY.
    • Added channel utilization counters.
    • Added DTIM support.
    • Added initial bandsteering support.
    • Added athstats tool.
    • Added broadcast filtering support.
    • Enabled DFS support.
    • Fixed broadcast filter configuration.
    • Fixed hidden SSID support.
    • Fixed a crash triggered by provisioning.
    • Fixed a bug causing SNMP hostname to disappear after provision and reboot.
    • Fixed PMF support.
    • Various stability improvements.
  • UAP-Pro
    • Removed bandsteering (isn’t supported).
  • UAP
    • Disabled the DS fast BSS transition.
    • Fixed management VLANs on downlink UAPs.
    • Fixed bug which caused 100% CPU use when fast BSS transition enabled.
    • Various wireless uplink changes, including adding multi-radio uplink support.
    • Tracks MAC filter rejections.
    • Various bug fixes and improvements.
  • USW
    • Fixed crash caused by autodetect.
    • Adjusted MAB priority, no longer waiting for 802.1X timeout to process.
    • Fixed port mirror provisioning.
    • Added switch PoE port overload and disconnect reporting.
    • Various bug fixes and improvements.
  • HW
    • L3 adoption and management improvements.

Ubiquiti UniFi SDN Controller Software Release Notes: 5.10.12-5.10.23

Official Release Notes

See the below links for official release notes. I only cover the fixes/changes and don’t include instructions on upgrading, links to downloads, etc., etc.

Since 5.10.21

  • Now allow SSH username to contain uppercase characters or to be an email address.
  • Now prevent Auto-Optimize Network from enabling High Performance Devices on 2.4GHz only APs.
  • Security improvement.
  • Various bug fixes and improvements.

Since 5.10.20

  • Fixed IPv6 encapsulation sizing.
  • Fixed pagination button type.
  • Fixed remote syslog validation when logging to controller.
  • Fixed various bugs with guest portal pre-authorization.

Since 5.10.19

  • Improved OS architecture detection to fix issue where wrong MongoDB storageEngine was being set.
  • Fixed logging format by adding date.
  • Fixed IPv6 MSS clamping.
  • Switched from deprecated Google+ API to Google People API (social guest portal authentication).
  • Miscellaneous fixes.

Since 5.10.17

  • Fixed database migration errors for users without guest portal configurations.
  • Fixed Mongo for 32-bit non-UCK systems.
  • Fixed error with getting temporary cloud credentials.

Since 5.10.12

  • Fixed issue that could prevent db migration from succeeding when upgrading.
  • Fixed issue where setting SSH username/password on a UCK would fail and not notify user.
  • Fixed issue when clicking Submit button for changing SSH credentials.
  • Fixed L3 adopt and upgrade process (bug report).
  • Fixed external guest portal cookies (bug report).

Since 5.9.29

  • Added bidirectional firewall rules for blocking traffic detected by IPS.
  • Added unsupported state for devices.
  • Added an interim firmware update for UPA, UPA-LR, UAP-OD, and UAP-OD5.
  • Added Adopt and Upgrade action for unsupported devices.
  • Added Icon for WAN Transition Event/Alert.
  • Added RFC 3261 unreserved characters to SIP username, extension, and password fields.
  • Added fixed vs inline property panel preference.
  • Added option to disable 5GHz only for high performance clients (part of Auto-Optimize Network feature).
  • Added firmware error detection flags for certain system events.
  • Added events for features enabled by Auto-Optimize Network feature.
  • Added unavailable text to Stats Overview modules.
  • Now checks for latest firmware when running custom upgrade.
  • replaced device icons with photos.
  • Implemented new styling for Port Diagrams.
  • Made action buttons in tables sticky.
  • Blocked clients not counted in Association Failures widget.
  • Now includes manual site-to-site VPNs on site import.
  • Improved Controller Wizard.
  • Improved accuracy of Neighboring Access Points.
  • Improved auto positioning tooltip.
  • Improved tooltip for local login with UBNT account.
  • Improved Most Active APs Widget.
  • Improved navigation in Wizard.
  • Improved global side navigation.
  • Now allow setting switch port name same as profile name.
  • Moved preferences to settings in User Interface.
  • Made improvements to buttons.
  • Updated events and alerts.
  • Updated Insights and Statistics to use new header opanel styles.
  • Updated Traffic Stats tables to use new table styles.
  • Updadted UniFi Network logo and title.
  • Updated device grid status bars.
  • Updated DPI chart UI.
  • Improved RF tooltip position for AP Property Panel.
  • Added option to ignore to Controller Update Available popup.
  • Fixed RADIUS Profile tooltip in WPA Enterprise settings.
  • Fixed IPS Map Country labels not refreshing after changing language.
  • On UniFi Cloud Key 1st Gen Only – now generate an event when MongoDB size exceeds 1.25 GB.
  • Fixed false rejections of valid IPv6 addresses for firewall groups and static routes.
  • Fixed firmware caching when firmware update service returns an error.
  • Fixed a bug that may have prevented database migration when upgrading the controller.
  • Fixed Missing logo in Sites overview.
  • Fix empty Property Panel after page reload.
  • Fixed Release notes bouncing when left open on low height screen.
  • Fixed empty ISP Graph X axis scale.
  • Moved temperature in USG overview property panel.
  • Fixed always displayed warning about not allowed channels.
  • Fixed device table icon padding.
  • Fixed WebRTC functionality on recent builds of Firefox.
  • Fixed various text overflow issues.
  • Fixed client historical label displaying the wrong value.
  • Fixed known clients inconsistency.
  • Fixed incorrect client’s uplink in Client List view.
  • Fixed double DHCPv6-PD node with PPPoE and DHCPv6.
  • Fixed Compact Database feature.
  • Fixed some untranslated strings in Insights/Switch Stats view.
  • Fixed XSS on fatal page.
  • Fixed interim update interval provisioning.
  • Fixed broken Device dist. module color picker.
  • Fixed console error in Hotspot Manager > Payments and Transactions > click on Payments button.
  • Fixed batch edit for nanoHD/In-Wall HD (and possibly other SKUs).
  • Fixed Release notes bounce when left open on low height screen.
  • Fixed unreadable controller logs when using default/lower loglevels.
  • Fixed issue causing devices to get stuck in adopting state.
  • Fixed a NPE which may occur when adopting a USG, and on every inform from it.
  • Fixed validation in Add Client form.
  • Fixed AP VLAN toggle applying to another property panel.
  • Fixed long name overlapping.
  • Fixed missing adopt button for USG in Property Panel.
  • Fixed no DPI data when switching from Overview to Apps.
  • Fixed position and size of tooltips.
  • Fixed sorting via model not working forUniFi AP-BaseStationXG.
  • Fixed icon size of dashboard DPI modules.
  • Fixed spacing on Switch port profiles tagged networks checkboxes.
  • Fixed wireless uplink detection when using Auto-Optimize Network feature.
  • Fixed and improved database handling to mitigate migration issues with large databases (reported bug report).
  • Fixed incorrect LAN traffic counter on switching widget.
  • Fixed voucher printing.
  • Fixed displaying Tx and Rx Radio values in Devices panel.
  • Fixed displaying Wi-Fi Experience for devices with one type of radio.
  • Fixed firmware notice alignment.
  • Fixed IPS date range.
  • Fixed tooltip for Adopting multiple USG.
  • Fixed the error message when deleting user groups attached to WLANs.
  • Now hide PoE label on switch port profile form when no PoE options available.
  • Fixed no margin between buttons in airView.
  • Remove ambiguity from switch power consumption in device properties.
  • Modified Switch ISP upload/download colors.
  • Performed Port Usage widget cleanup and componentization.
  • Legacy (Svg) map – add workaround for Chrome bug when device marker is moved to top left corner on animation applied.
  • Dashboard main status: fixed case when no WIFi Experience is available (i.e. 0 APs) but vertical separator is shown.
  • Added missing icon for STP blocking event.
  • Firewall: Fixed saving IPv6 rules.
  • IPS: Fixed Geo Location that was incorrect in certain cases.
  • Security improvements.
  • Various bug fixes and improvements.

Ubiquiti UniFi SDN Controller Software Release Notes: 5.8.23, 5.8.28, 5.9.29

See the Official Release Notes

New Features in 5.9.29

  • New Dashboard
  • IPS Dashboard
  • IPS Signature Suppression
  • IPS Signature Categories Control
  • Per Radio Uplink Control
  • Speed and Duplex Config for USG Interfaces
  • Fallback VLAN support for USW when using 802.1X
  • Added local SSO login.
  • Controller HD and Micro SD free space monitoring notifications
  • Analytic Reporting.
  • New Cloud Access Integration

New Features in 5.8.23

  • Scheduled Upgrades Support – Currently in beta.
  • Ability to add Site VPN Route Distance.
  • Add WeChat as an authentication method to Hotspot.
  • Added netconsole logging to config.
  • Added speed and duplex config for USG interfaces.
  • Added control for dnsmasq as DHCP server.
  • Added Wi-Fi Happiness to client STA statistics.
  • Added app switcher.
  • Added BaseStationXG LED bar color control to the device properties panel.
  • Allow setting opacity on Image-type maps.
  • Allow setting Management VLAN at Access Points.
  • Property Panel now shows images of most popular client devices.
  • One can assign USG Physical Ports to Logical Networks.
  • Local SSO login capabilities added.

Changes Since 5.8.28

  • Added about popup
  • Allow choosing which department to contact in chat window
  • Hide Fast Roaming feature for WEP networks
  • Fixed displaying IP address of gateway discovered by Discovery Tool
  • Fixed migration issue
  • Fixed a potential bug affecting autobackup on Windows 10
  • Fixed a bug which caused unifi.yourdomain.com to be provisioned to devices for both the management and STUN URLs.
  • No longer excludes all port forwarded ports from policy routing.
  • Other bugs fixes and improvements.

Changes Since 5.8.20

  • Added validation for Promotional URL input in Guest Control.
  • Enabled RF scanning for UAP-nanoHD.
  • Fixed a bug with AC-IW/IW-Pro provisioning which caused traffic to stop forwarding (only when the management VLAN and a WLAN VLAN are the same).
  • Fixed RADIUS accounting for switching products.
  • Fixed decoding UTF-8 characters over WebRTC.
  • Fixed analytics graph display on Firefox in Hotspot Manager.
  • Fixed default value for Outdoor Mode in batch AP configuration.
  • Fixed property panel auto scroll after refresh.
  • Fixed time range change after granularity modification on the Statistics Overview page.
  • Fixed reversed TX/R client stats.
  • Updated translations.
  • Other backend bug fixes and improvements.

Changes Since 5.7.x

  • Added description from mDNS.
  • Added tooltip that DHCP DNS must be a valid IP address.
  • Allow Facebook-based Hotspot authorization portal to be opened in Apple Captive Network Assistant.
  • Allow setting mask /31 (255.255.255.254) for USG/WAN so as to be in compliance with RFC3021.
  • Display warning when time series start day isbefore data retention settings for given granularity.
  • Use the same tab order as switches for UAP-AC-IW.
  • In the device list, invisible uplinks in uplink column after refresh.
  • Switch stats shouldn’t allow one to select device managed by another.
  • Prepopulate RADIUS Tunnel-Medium Type once “Virtual LANs (VLAN)” is selected.
  • Fixed MAC auth provisioning so RADIUS assigned VLAN is set when its enabled in the RADIUS profile.
  • Fixed devices disappearing from map when changing from legacy to designer without saving, also issue with changing map type from Google to image for a second time.
  • Removed extra PHY port for USG-XG.
  • Now show Hardware Offload as off when IPS is enabled, cannot be turned on.
  • Expose HTTPS blocking for Facebook Wi-Fi portal.
  • Other backend fixes and improvements.

Ubiquiti UniFi Security Gateway Release Notes: 4.4.21, 4.4.22

4.4.21 to 4.4.22

See official release notes.

  • Fixed commit error that was generated when multiple provisions were made of the same configuration.
  • Fixed regression in local web UI introduced in 4.4.21.
  • Fixed potential loop in signature fetching for IDS/IPS.
  • Improved dnsmasq reloading, increased sacalability of hostfile-update feature.
  • Fixed application of config changes on running system in source-validation/uRPF.
  • Updated tzdata (time zones) to version 2018d.
  • USG-XG-8 Only
    • Interface speed is now sent to LCM (display).

4.4.18 to 4.4.21

See official release notes.

  • Added back end port remapping in 5.8.x and newer controller versions.
  • Fixed premature expiring of TCP connection states for long-lived idle connections.
  • Made back end improvements to RADIUS server that remove character restrictions on passwords (‘ and ” now usable).
  • IDS/IPS was upgraded to Suricata 4.0.4 which provides minor performance and back end improvements as well as some bug fixes.
  • CPU utilization had increased in 4.4.18 for gathering statistics, mcad, and ubnt-util, brought back down to normal levels.
  • Resolved a memory leak in mcad.
  • Made back end improvements for dnsmasq, specifically DHCP server handling of hostnames of DHCP reservations.
  • dnsmasq is no longer limited to /8, /16, and /24 networks.
  • Disabled deprecated SSh ciphers.
  • Removed “noccp” from xl2tpd configuration, there should be no reason to disable and some Windows L2TP clients require it.
  • Removed offload scheduler due to performance degradations in some configurations which utilized rate limiting user groups.
  • Fixed a hung connection issue with FTP by importing an FTP contrack fix, only occurred with unusual formatting of 227 message.
  • Fixed use of external guest portal through USG.
  • USG-XG-G Only
    • Updated LCM firmware.
    • Updated Bluetooth back end.
    • Upgraded kernel version to resolve high/growing CU usage from migration processes.
    • Allow disabling of autonegotiation on eth0 port.