Ubiquiti UniFi SDN Controller Software Release Notes: 5.14.22-6.0.20

Official Release Notes

New Features

  • Beta Dashboard for UDM.
    • Implements Real-Time statistics.
  • Redesigned, simplified and moved Site, Controller, Maintenance, Remote Access, and Backup Configuration to System Settings.
    • Hide and auto-configure Data Retention for Statistics
    • Redesigned and moved Wi-Fi AI configuration to System Settings Page.
    • Redesigned and moved RADIUS and Switch Port profiles to Advanced Features page.
    • Redesigned and moved Services to Advanced Gateway Settings to Advanced Features page.
    • Moved User Groups to Client Groups on Advanced Features page.
  • Redesign and moved Wireless Networks configuration to Wi-Fi page.
    • Replaced WLAN Groups with new AP Groups feature.
    • Simplified WiFi creation – WPA2 security protocol with password is now set by default.
    • Allow selecting WPA2 Enterprise Security Protocol if at least one Radius profile is enabled.
    • Changed VLAN ID numeric input to Network dropdown.
    • Integrated Guest Control with Hotspot configuration on Wi-Fi page.
  • Redesigned and moved LAN Networks configuration to Networks page.
    • Added Auto Scale Network feature.
    • Moved VLAN Only Networks to Network Isolation in Advanced Features.
    • Updated Content Filtering categories and moved to Network Configuration.
    • Added new Device Isolation (creates guest network if turneed on) and Internet Access (blocks WAN access if turned off) toggles.
    • Redesigned and moved WAN Networks configuration to Internet page.
    • Redesigned and moved DPI configuration to Security page.
    • Redesigned and moved Threat Management configuration to Security page.
  • Added AP Groups Feature.
    • AP Groups simplifies the way one configures Wi-Fi and arranges APs into logical groups.
    • This feature is replacing WLAN Groups and WLAN Overrides.
      • It is a breaking change, some edge cases may not be covered.
    • Some WLAN Group configurations have been migrated to individual Wi-Fi Network configurations.
  • Preview Auto Scale Network Feature
    • Automatically adjusts subnet size and DHCP range with avoiding network collision.
  • Add ability to report incorrect Wi-Fi Experience.
  • Added Survey for Beta Dash and Beta Settings.

Improvements

  • 6.0.20
    • Added transition animations in Beta Settings
    • Added buttons for guest client authentication and unauthentication
    • Replaced Speed test gauge with numbers
    • Moved PMF to WLAN configuration in Beta Settings
    • Now shows AP promo placeholder in the new dashboard when there is no existing WiFi network.
    • Now shows original vendor logos when device logo is unavailable.
    • Removed Combine Name/SSID option from Settings.
    • Improved the user experience of AP Group validation in beta settings.
  • 5.14.22
    • Moved Analytics & Improvements toggle to UniFi OS settings (only applicable for UniFI OS systems).
    • Disabled DnsFilterAlert and IpReputationBlock events by default.
    • Added support for UXG-Pro.
    • Added Switch Port anomalies.
    • Added ability to report incorrect WiFi score.
    • Set default DTIM interval to 3.
    • Auto-backup is now enabled by default.
    • Disabled Element Adopt on Connectivity Disable.
    • Improved logging for Hotspot RADIUS.
    • Improve power cycle behavior for USP Plug.
    • Improved logging errors.
    • Updated translations.
    • Updated LCM idle timeout.

Bug Fixes

  • 6.0.20
    • Settings intro video now plays
    • Fixed scrolling in Property panel in Beta Clients page.
    • Fixed Peak Usage in the New Dashboard.
    • Fixed width for columns in network table.
    • Fixed saving DHCP Relay mode for network.
    • Fixed stretched vendor logos on Beta Clients page.
    • Fixed available actions for editing admins.
    • Fixed TxRate value on Clients page.
    • Fixed redirect URL in Cloud version of New Settings.
    • Fixed opening WLAN configuration page in New Settings.
    • Fixed DHCP initial values that made Cancel and Apply buttons show without making any changes.
    • Fixed Port Table value display.
    • Fixed problems with Device adoption.
    • Fixed visual style in client property panel Overview section.
    • Fixed selected columns not being saved in clients’ table.
    • Fixed multiple 404 errors.
    • Fixed Network Configuration fro LTE failover when there is no connected LTE device.
    • Fixed the “go to old dashboard” banner which was reappearing after dismissal.
    • Fixed packet count formatting on Beta Clients page.
    • Fixed scrollbar style in Beta Settings.
    • Fixed untoggable checkboxes in port configuration.
    • Fixed issues with WiFi Satisfaction graph on New Dashboard.
    • Fixed “No Clients” image position.
    • Facebook authentication in Hotspot is not allowing HTTP redirect anymore.
      • Is this a statement of fact? Or that this has been fixed so Facebook auth does allow redirections now?
    • Added missing options for Hotspot SSID’s.
    • Provisioned access points with VLAN id’s from all LAN configurations.
    • No longer allow enabling cloud email without remote access enabled.
    • Now excludes U-LTE and USP-Plug from AP Group device list.
    • Updated create WiFi validation.
    • Corrected MAC Filter table column widths.
  • 5.14.23
    • Removed false positive errors from controller logs.
    • Fixed overlapping firewall rule ID with port forward and DPI blocking enabled.
  • 5.14.22
    • No longer include empty fingerprint stats.
    • No longer prevent sending push notifications for generated events.
    • No longer display false positive STUN warning.
    • No longer use guest WiFi for element adoption.
    • No longer sending unsupported push notifications.
    • No longer reports UDM-Pro as client.
    • No longer sends notifications for unknown events.
    • Now includes missing active clients in some statistics.
    • Now prevents duplication of WAN2 network.
    • Now handles IP Reputation Alerts.
    • Fixes operator frame not showing.
    • Fixes operator login URL.
    • Fixes wrong hotspot URL redirects.
    • Fixes incorrect admin invite emails.
    • Fixes case where STP is enabled on the port but UI shows as disabled.
    • Fixed UXG syslog going to incorrect IP/FQDN.
    • Fixed reporting statistics for ports 2 and 11 on UDM-Pro.
    • Fixed infinite redirects when trying to authorize guest on UAP.
    • Fixed firewall rules for Guest Port on UDM.
    • Fixed creating hotspot operators.
    • Fixed saving tags.
    • Fixed batch deleting vouchers.
    • Fixed saving configuration for USP Plug.
    • Fixed USP Plug adoption.
    • Fixed USP Plug power cycling.
    • Fixed crashing WiFi AI page in Beta Settings.
    • Fixed error during processing informs.
    • Fixed “Can’t complete network setup because of missing max Auto Backup files number” error.
    • Fixed adoption of Protect cameras over Element Adoption SSID.
    • Now limit the number of pending devices to not allow DoS attack.
    • Now limit Auto Backup files to 100.
    • Speed tests should no longer block live updates.

Known Issues

  • 6.0.20
    • VLANs beyond UAP wireless downlinks may not have connectivity.
    • Creating VPN’s on UDM’s may result in commit errors.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: